VRChat
cubeecubee

Battery Indicator [PC / Mobile] (v5a)

A little wobbly headset battery level indicator that interfaces with OSC programs like OVR Toolkit and WayVR to stealthily inform everyone around you that you are soon going to poof out of existence! It also has AudioLink and can be stolen off your head by other users. Features - Prefabs for both PC and Mobile. - Grabbable and posable, with a VRCHeadChop component to keep it visible in first person. You can check your battery by grabbing it off your head! - Option to display Average Tracker Battery or Lowest Battery, for those of you with wired headsets or full-body trackers. - Can be set to appear only when your battery is low inside the Toggles menu. The bar turns red at 10%. - Emissive parts that can be seen in the dark. - An outline that pulses in worlds with AudioLink. (PC prefab) Avatars in the pictures are my personal avatar, my edit of Ukon Sode, and in the car one of my friends as a TF2 Sniper Taidum.

Stats

- 1 Mesh Renderer, 136 triangles. - 1 Material slot - 1 PhysBone component, 2 Transforms - 11 Synced Parameter bytes. (8 for battery level, 3 for toggles + charging state)

Installation and Notes

This prefab requires one of the providers specified in the Compatibility section below! Make sure your chosen provider is installed and sending properly in VRChat's OSC debug panel before trying to work with this prefab. To install on your avatar: - Make sure you have VRCFury imported (1.1002.0 at time of writing) and place the prefab on your avatar's root, then position it around where you'd like it to be. By default it will attach to your avatar's head. - If you'd like it to attach to a different part of your avatar such as your arm or hand, you can do so by changing the "Link To" option in the Armature Link section on the battery prefab. You may orient it in any way you like afterwards. - For Mobile avatars, use the "android-quest" prefab or swap out the material on the regular prefab. - The PC prefab uses Poiyomi Toon 9.3. If you'd like to edit the material make sure you have that imported, or you may change to a different shader instead.

Compatibility

You can view the compatibility chart here: https://docs.google.com/spreadsheets/d/1NDhLXiacPa93BRQuai8taDqL692XRhQ-fUQVK441quM/edit?usp=sharing Summary: - Steam Link and ALVR are known to work in most cases. - Virtual Desktop and Quest Link do not work in HMD mode as they do not send the headset battery level to SteamVR. - XSOverlay only works when using Average Tracker Battery mode. - WayVR supports all features on both SteamVR and Monado/WiVRn, as long as the relevant information is provided by your devices.

Terms of Service

You may use this asset on any avatar you like, public or private, translate it to any platform, and use for personal use or in a commission. Credit is optional when used as above, but appreciated. Do not claim to have made this asset or redistribute its package unmodified. If distributing a modification, give credit, make significant changes (i.e. a palette swap is not enough, but you may change the model entirely), and do not sell it.

Update information

When updating, please delete the old "battery" folder before importing the new package. Prefabs should re-connect themselves after importing. v5a - Fallback shader fix - Changed versioning scheme to "v<revision><patch>". - PC Shader now falls back to Toon Standard when shaders are blocked. v1.5 - Optimisation pass - !! This is a NEW PREFAB - You will have to replace the old one on your avatar manually. - Updated PC material to Poiyomi 9.3 - Reworked to count as a regular, non-skinned Mesh - Level now shows on both sides. - Removed 2 Animator Layers. - Replaced Charging Bolt with Triangle Indicator. This is used to communicate Charging, Disconnected and Connecting status. - Level Bar colour now shifts smoothly from green to red. (40% to 10%) - Auto-hides when disconnected unless Always Show is enabled. v1.4 - Update HMD parameter to work with OVR Toolkit's new changes. - Add "Lowest Battery" mode. - Use Toon Standard shader on mobile, adding emission. - Fix potential bug with charging state not being set in Tracker Mode. v1.3 - Added support for XSOverlay's Average Tracker Battery. - Added menu toggles to display Average Tracker Battery (XSOverlay, OVR Toolkit) and disable showing the charging state. - Battery will show "Connecting" if a mode that hasn't sent a battery is selected. v1.2 - Added support for WlxOverlay-S's parameters. - Added charging indicator that can appear when used with compatible providers. (VRCOSC and WlxOverlay-S) - Added connecting animation for when a provider is detected but hasn't sent a battery level yet. - XSOverlay will also cause this animation to play, but XSOverlay does not provide a headset battery level at time of writing. - When nothing is connected, the battery will now show an icon instead of being full. - Made the battery texture look more shiny. - Fixed warnings that would appear on the VRCFury components due to weird animation paths. - You should now be able to put the battery prefab anywhere on the avatar instead of just on its root. - Battery now responds to "disabled" battery levels -1 and 255, and enters disconnect animation accordingly. - Updated terms. Summary: Credit is optional when used, but required when redistributed. Clarify modification. v1.1 - Added support for OVR Toolkit's hmdBattery parameter. - Added an icon to the battery toggle in the menu.

Technical Notes and Alternatives

By default, the battery will only function with PCVR using the software outlined in the Compatibility section. - Alternative solutions can control the battery's state using the following Avatar Parameters: == (Float 0-1) to "battery/level" == (Bool) to "battery/charging" == You could set up a radial puppet controlling the "battery/level" parameter if you'd like to control it manually. - I think it should be possible to create a background Android app so Quest users can run that and have the battery work. I'm not skilled enough to create that myself yet though. :D

「ギフトとして贈る」とは

Battery Indicator [PC / Mobile] (v5a)
Battery Indicator [PC / Mobile] (v5a)
Battery Indicator [PC / Mobile] (v5a)
Battery Indicator [PC / Mobile] (v5a)
A little wobbly headset battery level indicator that interfaces with OSC programs like OVR Toolkit and WayVR to stealthily inform everyone around you that you are soon going to poof out of existence! It also has AudioLink and can be stolen off your head by other users. Features - Prefabs for both PC and Mobile. - Grabbable and posable, with a VRCHeadChop component to keep it visible in first person. You can check your battery by grabbing it off your head! - Option to display Average Tracker Battery or Lowest Battery, for those of you with wired headsets or full-body trackers. - Can be set to appear only when your battery is low inside the Toggles menu. The bar turns red at 10%. - Emissive parts that can be seen in the dark. - An outline that pulses in worlds with AudioLink. (PC prefab) Avatars in the pictures are my personal avatar, my edit of Ukon Sode, and in the car one of my friends as a TF2 Sniper Taidum.